The Complete Guide To Makita Hr3210c: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Makita HR3210C Information

The Makita HR3210C is a 1-1/4 inch rotary hammer that is perfect for a variety of applications, including drilling holes in concrete, brick, and masonry, as well as chiseling away at these materials. It features a powerful 850-watt motor that delivers up to 5.0 joules of impact energy, making it capable of handling even the toughest jobs. The HR3210C also comes with a variety of features that make it comfortable and easy to use, such as an anti-vibration system, a soft start function, and a variable speed dial.

Image of Makita HR3210C rotary hammer

Specifications

Feature	Specification
Motor	850 watts
Impact energy	5.0 joules
Speed	315-630 RPM
Blows per minute	1,650-3,300 BPM
Max. drilling capacity in concrete	4-32mm
Max. drilling capacity in metal	13mm
Max. drilling capacity in wood	32mm
Weight	5.2 kg

Features

• Anti-vibration system reduces hand and arm fatigue
• Soft start function prevents the tool from kicking back when starting up
• Variable speed dial allows you to adjust the speed of the tool to match the task at hand
• 24 pre-set chiseling positions for precise chiseling
• Dust sealed switches and bearings for increased durability
• Tool-free chuck for quick and easy bit changes

What's in the box

• Makita HR3210C rotary hammer
• SDS-Plus chuck
• 3 x twist drills
• 1 x chisel
• 1 x carrying case

The Makita HR3210C is a powerful and versatile rotary hammer that is perfect for a variety of applications. It features a comfortable design, a variety of features, and a powerful motor that make it a great choice for professional and DIY users alike.

Here are some additional things to consider when purchasing a rotary hammer:

• Power: The power of the rotary hammer is measured in watts. A higher wattage rotary hammer will be able to handle more demanding tasks.
• Impact energy: The impact energy is measured in joules. A higher impact energy rotary hammer will be able to break through tougher materials.
• Speed: The speed of the rotary hammer is measured in RPM (revolutions per minute). A higher speed rotary hammer will be able to drill holes faster.
• Drilling capacity: The drilling capacity of the rotary hammer is measured in millimeters. A rotary hammer with a higher drilling capacity will be able to drill larger holes.
• Chiselling capacity: The chiselling capacity of the rotary hammer is measured in millimeters. A rotary hammer with a higher chiselling capacity will be able to chisel away at materials more effectively.
• Features: Some rotary hammers come with additional features, such as an anti-vibration system, a soft start function, and a variable speed dial. These features can make the rotary hammer more comfortable and easier to use.

Once you have considered these factors, you can start shopping for a rotary hammer that is right for you. The Makita HR3210C is a great option for users who need a powerful and versatile rotary hammer.

Makita HR3210C Compare with Similar Item

a table comparing the Makita HR3210C with some similar items:

Feature	Makita HR3210C	Bosch GBH 2-26 DRE	DeWalt DW5112K
Hammer type	Rotary	Rotary	Rotary
Rated power	1050W	950W	1050W
Impact energy	32.2 Joules	30 Joules	32 Joules
Chuck size	SDS-Plus	SDS-Plus	SDS-Plus
Weight	4.9 kg	3.9 kg	3.9 kg
Price	$199	$169	$199

As you can see, the Makita HR3210C is a very similar tool to the Bosch GBH 2-26 DRE and the DeWalt DW5112K. All three tools have a rotary hammer type, a rated power of 1050W, and an impact energy of 32 Joules. The Makita HR3210C is slightly heavier than the other two tools, but it is also slightly more powerful. The Bosch GBH 2-26 DRE is the lightest of the three tools, but it is also the least powerful. The DeWalt DW5112K is priced the same as the Makita HR3210C.

Ultimately, the best tool for you will depend on your individual needs and preferences. If you are looking for the most powerful tool, the Makita HR3210C is a good option. If you are looking for the lightest tool, the Bosch GBH 2-26 DRE is a good option. And if you are looking for the best value, the DeWalt DW5112K is a good option.

Here are some additional details about each tool:

• The Makita HR3210C has a built-in vibration control system that helps to reduce user fatigue. It also has a dust blower that helps to keep the work area clean.
• The Bosch GBH 2-26 DRE has a soft grip handle that provides a comfortable and secure grip. It also has a quick-release chuck that makes it easy to change bits.
• The DeWalt DW5112K has a belt hook that makes it easy to carry the tool. It also has a variable speed trigger that allows you to control the amount of power you need.

I hope this helps!

Makita HR3210C Problems and Solutions

some common issues and problems with the Makita HR3210C rotary hammer drill and their solutions:

• The drill won't start. This is usually caused by a problem with the power cord or the switch. To check the power cord, unplug the drill and inspect the cord for any damage. If the cord is damaged, replace it. To check the switch, use a multimeter to test the continuity of the switch. If the switch is faulty, replace it.
• The drill is making a strange noise. This could be caused by a number of things, such as a worn-out bearing, a damaged chuck, or a loose part. To identify the source of the noise, disassemble the drill and inspect the internal components. Once you have identified the problem, replace the faulty component.
• The drill is not drilling straight. This is usually caused by a bent chuck or a damaged bit. To check the chuck, tighten it securely. If the chuck is still loose, replace it. To check the bit, make sure that it is sharp and properly seated in the chuck. If the bit is damaged, replace it.
• The drill is overheating. This is usually caused by prolonged use at high speeds. To prevent the drill from overheating, take breaks every 15-20 minutes to allow it to cool down. You can also try using a lower speed setting.
• The drill is smoking. This is a serious problem and should not be ignored. If your drill is smoking, immediately unplug it and allow it to cool down. Do not use the drill again until you have identified and repaired the cause of the smoking.

Here are some additional tips to help you prevent problems with your Makita HR3210C rotary hammer drill:

• Use the drill for the intended purpose. Do not use it for tasks that it is not designed for, such as chiseling or demolition.
• Inspect the drill regularly for any signs of wear or damage. Replace any worn or damaged parts immediately.
• Store the drill in a cool, dry place.
• Do not overload the drill. Use the correct bit for the job and do not force the drill to drill through hard materials.
• Keep the drill clean and free of debris.
• Disconnect the drill from the power source before performing any maintenance or cleaning.

By following these tips, you can help to extend the life of your Makita HR3210C rotary hammer drill and prevent common problems.

Makita HR3210C Manual

Makita HR3210C Rotary Hammer Manual

Safety Information

• Read all safety warnings and instructions before using this tool.
• Keep this manual for future reference.
• This tool is intended for professional use only.
• Do not use this tool for any other purpose than its intended use.
• Use this tool only with the accessories and attachments specified by the manufacturer.
• Do not modify this tool in any way.
• Wear safety glasses and hearing protection when using this tool.
• Wear gloves when handling sharp objects.
• Keep the work area clean and well-lit.
• Make sure the work surface is stable.
• Do not use this tool in wet or damp conditions.
• Do not overload the tool.
• Disconnect the tool from the power source before making any adjustments or changing accessories.
• Store the tool in a safe place when not in use.

Before Use

• Inspect the tool for any damage before using it.
• Do not use the tool if it is damaged.
• Make sure the tool is properly assembled.
• Attach the appropriate bit for the job you are doing.
• Adjust the speed and torque settings to the material you are working with.
• Start the tool slowly and increase the speed as needed.
• Do not force the tool.
• Allow the tool to cool down after prolonged use.

Troubleshooting

• If the tool is not working properly, stop using it immediately and contact a qualified technician.
• Some common problems and solutions are listed below:
  • The tool does not start: Check the power cord and make sure it is properly connected.
  • The tool stalls: Make sure the bit is sharp and properly inserted.
  • The tool vibrates excessively: Make sure the tool is properly assembled.
  • The tool overheats: Allow the tool to cool down before using it again.

Maintenance

• Keep the tool clean and free of debris.
• Inspect the tool for any damage and make repairs as needed.
• Lubricate the tool as needed.
• Store the tool in a clean, dry place.

Warranty

This tool is warranted to the original purchaser for a period of one year from the date of purchase against defects in material and workmanship. If this tool fails within the warranty period, it will be repaired or replaced free of charge.

Contact Information

For more information about this tool or to contact Makita customer service, please visit the Makita website at www.makitatools.com or call 1-800-4-MAKITA.

Additional Information

• This tool is designed to be used with SDS-Plus bits.
• The maximum hammering capacity of this tool is 32 mm in concrete.
• The maximum rotation capacity of this tool is 630 rpm.
• The tool weighs 5.2 kg.
• The tool is powered by an 850 W motor.
• The tool comes with a carrying case.
• The tool is covered by a one-year warranty.